thanh niên manh động
Senior Member
up lên Winbox 3.34 và routerOS 7.1.2 chứ sao nữa
Chào các bác. Mình mới mua 1 con Mikrotik RB750Gr3 về làm router và quay PPOE. Tuy nhiên gặp vấn đề là con redmi AC2100 (dùng để phát wifi) cắm vào thì chỉ dùng mạng được 10-15 phút là bị mất mạng. Mình đã thử tắt DHCP để router cấp IP thì cũng bị tương tự. Mong các bác giúp đỡ
Hi bác, khi mất mạng thì trên biểu tượng wifi có dấu chấm than. Vào thì WIFI thì nó báo yêu cầu đăng nhập (vào thì ra 1 đống tiếng trung quốc đại ý là bị mất kết nối gì đó ). À, của wifi em dùng là Xiaomi Redmi AC2100 nhé. Em thấy đèn tương ứng với cổng trên con mikrotik cũng bị mất. Nếu em rút ra cắm lại thì lại chạy được 10-15 phút, sau đó là rớt.Mất mạng là 1 cụm từ có nghĩa rất rộng.
Mỗi khi mất mạng thì bạn ping tới con ac2100 dc ko? Nếu ping dc thì ping tiếp tới mikrotik được không?
Mất mạng ở đây có nghĩa là mất ở local hay mất ở internet?
Thôi flash fw con ac2100 sang thằng khác đi.Hi bác, khi mất mạng thì trên biểu tượng wifi có dấu chấm than. Vào thì WIFI thì nó báo yêu cầu đăng nhập (vào thì ra 1 đống tiếng trung quốc đại ý là bị mất kết nối gì đó ). À, của wifi em dùng là Xiaomi Redmi AC2100 nhé. Em thấy đèn tương ứng với cổng trên con mikrotik cũng bị mất. Nếu em rút ra cắm lại thì lại chạy được 10-15 phút, sau đó là rớt.
//chỗ ping thì em chưa ping được vì dùng trên điện thoại, để tối em cài tool rồi gửi lại bác thông tin nhé
Stable thì lên 7.1.2
What's new in 7.1.2 (2022-Feb-03 16:15):
*) bgp - fixed routing table and BGP configuration order in export;
*) bluetooth - disable scanning by default;
*) chr - improved system stability when writing into memory;
*) chr - temporarily suspended downgrade to RouterOS v6;
*) console - updated copyright notice;
*) dhcpv4-server - remove dynamic leases when server configuration is removed;
*) hotspot - fixed web page loading using HTTPS;
*) interface - fixed minor memory leak when interface or connected route is changed;
*) lte - added MAC address and IPv6 LL address persistence after reboot on EG12 and EG18 modems;
*) lte - added class based support for configless RNDIS LTE modems;
*) lte - expose diagnostics channel for all modems;
*) lte - fixed IPv6 address addition after startup on R11e-LTE6;
*) lte - fixed packet forwarding on R11e-4G and R11e-LTE-US;
*) lte - fixed support for Sierra MC7710;
*) lte - improved stability on "+EGMR" response in MBIM mode;
*) lte - properly recognize MBIM modem in USB port as LTE on Chateau 5G;
*) ntp - allow adding duplicate server address if dynamic entry exists;
*) ntp - fixed "use-local-clock" when enabling server;
*) ntp - fixed multicast mode support;
*) ntp - improved IPv6 address support;
*) ospf - added "ptmp-broadcast" interface type (compatible with RouterOSv6 PTMP type);
*) ospf - convert ospf "static" redistribute to "static,dhcp,modem,vpn" after update from RouterOS v6;
*) ospf - fixed external LSA not updating after prefix netmask change;
*) ppp - fixed AT+CPIN chat when SIM PIN is specified;
*) qsfp - correctly display auto-negotiation status;
*) queue - improved system stability when processing traffic;
*) route - fixed "suppress-hw-offload" update;
*) route - fixed router's LSA for PTP networks;
*) route - show OSPF and RIP specific attributes in "/routing route" table;
*) route-filter - fixed incorrect invert-match configuration upgrade from RouterOS v6;
*) route-filter - fixed range conversion after update from RouterOS v6;
*) rpki - made RPKI verify non-strict, introduces new state "unverified";
*) rpki - show expire timer;
*) socks - fixed SOCKS5 support;
*) system - fixed license loss on some RB1100Dx4 and RB4011 devices;
*) tr069-client - added support for wireless client uptime reporting;
*) usb - fixed display of incorrect port count for USB serial ports;
*) vlan - fixed improper VLAN priority addition for routed packets;
*) webfig - do not show side menu if WebFig is disabled by skin;
*) winbox - added "VRF" parameter to "IP/Services" menu;
*) winbox - added MLAG support;
*) winbox - added ZeroTier support;
*) winbox - allow setting "Interface" parameter for 100G LED types;
*) winbox - do not show "Antenna Scan" button on devices that do not support it;
*) winbox - fixed "action" field in "IP/Web Proxy/Access" menu;
*) winbox - fixed address list type parameters in "Routing" menu;
*) winbox - made OSPF interface type names consistent between CLI and GUI;
*) x86 - added support for Intel E810 NIC;
*) x86 - made "no" the default value for "disable-running-check" ethernet parameter;
*) x86 - properly distinguish multiple NICs that share the same PCI bus number;
Còn long tem thì lên 7.1 rồi
Hàng fpt tuồng ra đóCảm ơn thím, sao em thấy gian thương bán 3011 ~3tr hết nhỉ?
thế mà kêu bọn fpt cho con 3011 nó kêu ko cóHàng fpt tuồng ra đó
b dùng VNPT à?
Nat port 123 sang port 11111 cho nó.Xin giúp đỡ. rb750gr3 luôn sai giờ. Thanks
sao các bản sau này ăn ram và cpu thế nhỉ? em chạy gr3, 60tb mà nó ngốn hơn 1 nửa ram rồi, cpu thì luôn 10% . Trước dùng 6.x toàn 0% và trống 200mb.Stable thì lên 7.1.2
What's new in 7.1.2 (2022-Feb-03 16:15):
*) bgp - fixed routing table and BGP configuration order in export;
*) bluetooth - disable scanning by default;
*) chr - improved system stability when writing into memory;
*) chr - temporarily suspended downgrade to RouterOS v6;
*) console - updated copyright notice;
*) dhcpv4-server - remove dynamic leases when server configuration is removed;
*) hotspot - fixed web page loading using HTTPS;
*) interface - fixed minor memory leak when interface or connected route is changed;
*) lte - added MAC address and IPv6 LL address persistence after reboot on EG12 and EG18 modems;
*) lte - added class based support for configless RNDIS LTE modems;
*) lte - expose diagnostics channel for all modems;
*) lte - fixed IPv6 address addition after startup on R11e-LTE6;
*) lte - fixed packet forwarding on R11e-4G and R11e-LTE-US;
*) lte - fixed support for Sierra MC7710;
*) lte - improved stability on "+EGMR" response in MBIM mode;
*) lte - properly recognize MBIM modem in USB port as LTE on Chateau 5G;
*) ntp - allow adding duplicate server address if dynamic entry exists;
*) ntp - fixed "use-local-clock" when enabling server;
*) ntp - fixed multicast mode support;
*) ntp - improved IPv6 address support;
*) ospf - added "ptmp-broadcast" interface type (compatible with RouterOSv6 PTMP type);
*) ospf - convert ospf "static" redistribute to "static,dhcp,modem,vpn" after update from RouterOS v6;
*) ospf - fixed external LSA not updating after prefix netmask change;
*) ppp - fixed AT+CPIN chat when SIM PIN is specified;
*) qsfp - correctly display auto-negotiation status;
*) queue - improved system stability when processing traffic;
*) route - fixed "suppress-hw-offload" update;
*) route - fixed router's LSA for PTP networks;
*) route - show OSPF and RIP specific attributes in "/routing route" table;
*) route-filter - fixed incorrect invert-match configuration upgrade from RouterOS v6;
*) route-filter - fixed range conversion after update from RouterOS v6;
*) rpki - made RPKI verify non-strict, introduces new state "unverified";
*) rpki - show expire timer;
*) socks - fixed SOCKS5 support;
*) system - fixed license loss on some RB1100Dx4 and RB4011 devices;
*) tr069-client - added support for wireless client uptime reporting;
*) usb - fixed display of incorrect port count for USB serial ports;
*) vlan - fixed improper VLAN priority addition for routed packets;
*) webfig - do not show side menu if WebFig is disabled by skin;
*) winbox - added "VRF" parameter to "IP/Services" menu;
*) winbox - added MLAG support;
*) winbox - added ZeroTier support;
*) winbox - allow setting "Interface" parameter for 100G LED types;
*) winbox - do not show "Antenna Scan" button on devices that do not support it;
*) winbox - fixed "action" field in "IP/Web Proxy/Access" menu;
*) winbox - fixed address list type parameters in "Routing" menu;
*) winbox - made OSPF interface type names consistent between CLI and GUI;
*) x86 - added support for Intel E810 NIC;
*) x86 - made "no" the default value for "disable-running-check" ethernet parameter;
*) x86 - properly distinguish multiple NICs that share the same PCI bus number;
Còn long tem thì lên 7.1 rồi
VNPT đang cấm port 123 trên phần lớn thuê bao, dùng cái này cũng update time dc nhé. Nó chạy qua port UDP 15252 trên server của Cloud của Mik, đã test. Ngon bổ rẻ
sao các bản sau này ăn ram và cpu thế nhỉ? em chạy gr3, 60tb mà nó ngốn hơn 1 nửa ram rồi, cpu thì luôn 10% . Trước dùng 6.x toàn 0% và trống 200mb.
sao các bản sau này ăn ram và cpu thế nhỉ? em chạy gr3, 60tb mà nó ngốn hơn 1 nửa ram rồi, cpu thì luôn 10% . Trước dùng 6.x toàn 0% và trống 200mb.
https://item.taobao.com/item.htm?sp...vEako&id=653321287041&ns=1&abbucket=19#detailThím nào có link rb5009 taobao không nhỉ
Hình như là 60 thiết bị cụ ơi.60tb là sao ta? Data xài tới 60tb hay sao, vậy là chạy liên tục cũng lâu rồi. Restart nó đi